NO.4 201 Stainless Steel Sheet 4x8 Cold Rolled DIN EN Standard
- Grade:201 Stainless Steel
- Shape:Flat
- Technique:Cold Rolled
- Feature:Sustainable
- Length: as required
- Surface Treatment:No.4 or according to customer requirement
- Material :201,304, 304L,316, 316L, 410, 430 and so on
- Shipment Time:Within 15-20 workdays after receiving deposit or L/C
| Chemical composition and mechanical properties of stainless steel
coils |
| Grade | Chemical Composition (%) | Mechanical Performance |
| C | Si | Mn | P | S | Ni | Cr | Mo | Hardness |
| 201 | ≤0.15 | ≤1.00 | 5.5/7.5 | ≤0.060 | ≤0.030 | 3.5/5.5 | 16.0/18.0 | - | HB≤241,HRB≤100, HV≤240 |
| 304 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 8.0/11.0 | 18.00/20.00 | - | HB≤187,HRB≤90,HV≤200 |
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00/14.00 | 16.0/18.0 | 2.00/3.00 | HB≤187, HRB≤90 HV≤200 |
| 316L | ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.03 | 10.00/14.00 | 16.0/18.0 | 2.00/3.00 | HB≤187, HRB≤90 HV≤200 |
| 410 | ≤0.15 | ≤1.00 | ≤1.25 | ≤0.060 | ≤0.030 | ≤0.060 | 11.5/13.5 | - | HB≤183, HRB≤88 HV≤200 |
| 430 | ≤0.12 | ≤1.00 | ≤1.25 | ≤0.040 | ≤0.03 | - | 16.00/18.00 | - | HB≤183, HRB≤88 HV≤200 |
| Cold Rolled Stainless Steel Coil/Sheet/Plate Information |
Technique |
Surface Finished |
Grade Series |
Thickness(mm) | Width(mm) |
| Main Dimension |
| 20-850 | 1000 | 1219 | 1240 | 1250 | 1500 |
| Cold Rolled | 2B | 201/304/316L | 0.25-3.00 | √ | √ | √ | √ | | √ |
| 410S/430 | 0.25-2.00 | √ | √ | √ | √ | √ | √ |
| NO.4/Hairline/Mirror/Linen SB | 201/304/316L | 0.22-3.00 | √ | √ | √ | √ | | |
| 410S/430 | 0.25-2.00 | √ | √ | √ | √ | √ | |
| BA | 201/304 | 0.20-1.80 | √ | √ | √ | √ | √ | |
| 410S/430 | 0.25-2.00 | √ | √ | √ | √ | | |
| 2BA | 410S/430 | 0.25-2.00 | √ | √ | √ | √ | |
|
FAQ
Q1: WHERE IS MEIBAOTAI LOCATED?
A1: Our company located in FOSHAN GUANGDONG CHINA.
Factory Address: A2-3 Factory Building, Sanshan Huadao North Road,
Nanhai Distrct, Foshan City, Guangdong Provenice, China
Export Office Address: Room 1919, Floor 19, Veinna building,
Chencun, Shunde, Foshan, Guangdong, China
Q2: HOW CAN I GET SOME SAMPLE?
A2: Through the international express delivery,like UPS,DHL,TNT.
Q3: COULD WE GET A SAMPLE BEFORE A FORMAL ORDER
A3: Yes, we can provide a sample before order. Checking a sample is
a best way to understand the detail quality.
Q4: WHAT KIND OF PACKAGING COULD YOU PRODUCE?
A4: Waterproof paper, and steel strip packed.
Q5: WHAT TYPES OF PAYMENT DO YOU ACCEPT?
A5: The types of payment we usually use L/C and T/T.
Q6: HOW DOES YOUR COMPANY DO REGARDING QUALITY CONTROL?
A6: We'll keep tracing feedback of our products from clients and
that's what make us different from other suppliers. We're customer
care enterprise.
Q7: HOW ABOUT YOUR DELIVERY TIME?
A7: 7~15 days for spot products and 30~45 days for customized
products
Q8: COULD WE PUT OUR LOGO ON THE PRODUCTS?
A8: Yes.You must have your own log or mark on them..So sure that if
you need us put the logo on the products. You can provide us the
format and detail,then we will do it for you.
What Is NO.4 Finsh Sheet ?
No. 4 finish simply as, “General purpose polished finish, one or
both sides”. It also states, “No. 4 - A linearly textured finish
that may be produced by either mechanical polishing or rolling.
Average surface roughness (Ra) may generally be up to 25
micro-inches (0.64 micrometers).
No. 4 Finish is the most popular for appliances, the food and
beverage industry, elevators, escalators, hospitals, and any work
area where there is food contact.
The Features Of NO.4 Finish
It is characterized by short, parallel polishing lines and is the
easiest of the stainless finishes to maintain. Depending on the
requirements of the application, the final finish can be anywhere
between 120 and 320 grit. (Higher grit numbers produce finer
polishing lines and more reflective finishes.) The surface
roughness is typically Ra 25 micro-inches or less.
